Products

Based on a range of standard bright steels (square, hexagonal, flat and key steel dimensions in h9/hll) of the St-, C-, free-cutting as well as case hardening and tempered steel qualities we manufacture the profiles according to drawings with the know-how of more than 800 special designs.

The basis for this process is formed by the company's own development department and tool manufacture. The bright steel profiles processed with modern drawing-techniques are delivered to destinations all over the world.

All of our steel are produced with a length of between 1.000 and 8.000 mm. The materials, dimensions and measuring tolerances are adjusted to your individual requirements. Our bright steels are produced according to DIN EN 10277 / 10278  and/or the technical reqirements you specify . They can be packed and delivered in a variety of ways:

In bundles secured with steel bands - wrapped in corrosion - proof plastic sheeting - in one-way wooden crates  (for land or sea shipments).

A selection from our product range

  • Bright steel

    Special cold drawn rods
    Surface diameter: 4 - 1.500 mm2

    Wedge steel according to DIN 6880
    Surface diameter: 4 - 2.016 mm2

    Measured in mm:

    Quadrate dimensions:
    2, 4, 5, 6, 7, 8, 10, 12, 14, 16, 18, 20, 22

    Rectangular dimensions:
    8x7, 10x8, 12x8, 12x10,14x9, 16x10, 18x11, 20x12, 22x14,25x14, 28x16, 32x18, 36x20, 40x22, 45x25, 50x28, 63x32

    Flat rectangular dimensions:
    4x2, 4x3, 5x3, 5x4, 6x4, 6x5, 8x5, 8x6, 10x6, 12x6,14x6, 16x7, 18x7, 20x8, 22x9, 25x9, 28x10, 32x12, 36x12
     
  • Flat steel conforming to EN 10278
    Measured in mm: Width: 8 - 80mm
    Thickness: 2 - 20mm
     
  • Hexagon steel conforming to EN 10278
     Calibre:  3 - 36 mm
     
  •  Square steel conforming to EN 10278
    Calibre: 2 - 36 mm
     
  • Octagon steel conforming to EN 10278
    Tolerance h 11 / measurement range:
     8 - 26 mm
     
  • Rolled steel
    Warm rolled flat steel
    Width: 8 - 25 mm, thickness: 2 - 10 mm
    Width tolerance: 0,7 mm or 0,5 mm
    Thickness tolerance: 0,5 mm oder 0,4 mm

    Warm rolled structural and flat steel in rings and rods

    Surface diameter range: 20 - 120 mm²

  • Special and intermediate measurements, as well as special tolerances, are available on demand.
 

:: top ::